Roofing License: #CCC1327429(561) 318-8624
    Tequesta / Jupiter Inlet Colony · Palm Beach County, Jupiter to Boca Raton

    Metal roof replacement in Tequesta

    Drive Tequesta Drive toward the river and count the standing-seam roofs on the rebuilt houses; the village has taken to metal faster than most of the county, and the reason is the water. Country Club Point, Riverside Oaks and Bayview Terrace sit on the Loxahatchee with salt in the air, the Jupiter Inlet Beach Colony faces the Atlantic at the mouth of the Inlet, and a roof in those places lives or dies by its hidden metal. Under tile, that means galvanized valleys and steel nails rusting to lace. A standing-seam roof built in aluminum on stainless clips has nothing hidden to lose: no fasteners across the field, no underlayment-under-tile wear point, continuous panels that shed a river squall instantly and hold in the wind that comes up the Inlet. It also runs cooler over an attic in August. Inland at Tequesta Pines, Cypress Ridge and Key West Village the case is simpler, replace the roof once, and coated steel serves well where the salt does not reach. The Country Club neighborhoods and the Colony have architectural standards, and some of them still expect tile; we check before we quote so nobody holds a proposal for a roof the committee will refuse. Molsbee Roofing has been a family business since 1975, based in Lake Worth Beach and working Palm Beach County, Jupiter to Boca Raton, and Tequesta is the northern end of that run. Where metal is permitted, the job begins under the panels: old roof off, plywood inspected and repaired, a high-temperature self-adhered underlayment rolled over everything, then panels formed to the length of each roof plane and fixed on concealed clips so no screw is exposed across the field to back out or weep. On the river and ocean streets the panels are aluminum, the clips and fasteners stainless, the eave and rake edges hemmed and sealed, and every flashing at a wall, chimney or skylight the same metal as the roof. The Village of Tequesta permits the work and inspects at dry-in and final. Free roof inspections: a roofer measures, photographs the deck, and writes standing seam, 5V, tile and shingle side by side for your own house. Open 24 hours a day, 7 days a week at 561-318-8624.

    Free roof inspections. Open 24 hours, Monday to Sunday.

    We answer the phone 24 hours a day, 7 days a week

    Schedule your FREE

    Roof Inspection/Estimate Today!

    📞 We'll call you back to schedule your free roof inspection

    4.8 RATING
    4.9 RATING

    Neighborhoods we work in

    • Tequesta
    • Jupiter Inlet Beach Colony
    • Country Club Point
    • Riverside Oaks
    • Cypress Ridge
    • Key West Village
    • Bayview Terrace
    • Tequesta Pines

    ZIP 33469

    What it costs

    Metal costs more than shingle up front and sits near tile at the upper end of a full roof in Palm Beach County. It lasts decades. We price metal, tile and shingle side by side for your house.

    Aluminum on the water, coated steel inland

    On Country Club Point, Riverside Oaks, Bayview Terrace and at the Jupiter Inlet Beach Colony the panels are aluminum and every clip and screw is stainless, with hemmed and sealed edges, because river and ocean salt streak a bare-steel cut edge within a few seasons. Inland at Tequesta Pines, Cypress Ridge and Key West Village, coastal-rated coated steel is a sound, less expensive panel. We say which your address needs rather than selling the dearer one everywhere.

    Standing seam or 5V on a Tequesta house

    Standing seam: panels formed to length, concealed clips, no exposed fasteners across the field, clean vertical lines that suit the rebuilt river houses and the newer construction. 5V crimp: the traditional exposed-fastener Florida panel, less expensive, right for a boathouse, a garage or a cottage, but every screw is a future maintenance point and near the water that matters more. We install both and say plainly which your house and budget call for.

    Country Club and Colony standards, then the Village permit

    The Tequesta Country Club neighborhoods and the Inlet Colony review what a roof looks like from the street, and some still expect tile on a primary home while allowing standing seam in approved finishes elsewhere. We pull the standards before the inspection, prepare the submittal with panel profile, finish and color where metal is possible, and say plainly where it is not. The Village of Tequesta issues the permit after that approval and inspects at dry-in and final.

    Wind rating and price, in plain words

    Every panel system we install carries a Florida Product Approval for Palm Beach County's wind zone, installed to that approval and checked by the Village inspector; the approval numbers go in your close-out file. Metal sits near tile at the upper rung of a full roof here and well above shingle; standing seam above 5V, aluminum above coated steel, waterfront components above inland. Tequesta has not given us enough metal jobs to quote a town-only figure, so we measure yours and write the comparison.

    Questions homeowners ask

    Ready when you are

    Free roof inspections. Family-run since 1975, licensed FL CCC1327429.