I would highly recommend Molsbee Roofing! Nicole the office manager was keeping us informed from beginning to end, was extremely professional and excellent customer service throughout the entire process. They had a great team working on our roof and we are completely satisfied!Read on Google

Mangonia Park, FL 33407
Roof repair in Mangonia Park
Request your free inspection
Roof repair in Mangonia Park splits into two jobs: modest houses on the residential streets, and large warehouse and industrial spans in 33407. Nothing starts until you have had the free inspection, the photos of its findings and a written scope with the price.
We repair tile, shingle, flat and metal roofs here, from pitched houses off Australian Avenue and their low-slope carport sections to the membrane, coated and metal-building roofs on the industrial side. Inland, away from salt, the work centers on flashings, rooflights and drainage.
Molsbee Roofing has served Palm Beach County since 1975 from our shop in Lake Worth Beach, under Florida license CCC1327429.
Active leak? See roof leak repair in Mangonia Park. For a new roof, read roof replacement in Mangonia Park. More on roofing in Mangonia Park.
- Freeroof inspection with photos
- Writtenprice before any work
- Manufacturerproduct warranties in writing







Planning a roof repair in Mangonia Park
Off Australian Avenue: a perished part, or a roof at its end
On a Mangonia Park house most repairs come down to one small part that has failed while the covering around it is intact: a vent collar split by the sun, sealant shrunk back from a wall flashing, a valley packed with debris, or a blocked outlet on a carport section. Those are repairs.
When the layer under the covering has failed at several of the points we open, or the deck has been wet for seasons, replacement is the honest answer, and the written scope prices the two apart.
Repairs by material on an inland 160 mph roof
Mangonia Park sits in the county's 160 mph mainland band, so replacement shingle goes back with at least four corrosion-resistant nails per strip, tied into the sound courses around it. Clay barrel tile is handled by detach-and-reset where the underlayment has failed: the tile comes up, new underlayment and flashing go down, and the same tile is reset by crews in protective, safe footwear.
A low-slope carport section is repaired at its outlet and wall joint. On metal buildings, loose fasteners and failed trim are refastened or replaced, and sound metal stays in place.
Rooflights, penetrations and outlets on a warehouse span
A large industrial roof is repaired at its details rather than across the open field. Rooflight upstands, penetrations cut for power, air or extraction, and supports resting on the membrane are where water enters, and it can run a long way inside the assembly before it shows below.
We map the span into sections and photograph every rooflight, penetration and outlet, then price each repair as its own line, phased so the floor below keeps working.
Summer rain, the permit desk and the county flood legend
Here it is the daily summer rain, often wind-driven, that tests flashing and edge metal, not salt. If a permit applies, we confirm which desk handles the address and file the matching county roofing form, 100 for general, 200 shingle, 300 tile or 400 flat.
Work is permitted under the Florida Building Code 8th Edition. From 1 October 2026 every permit application in Palm Beach County carries a flood legend, so we look up the parcel before filing.
How it works in Mangonia Park
Permits in Mangonia Park
For work in Mangonia Park, confirm requirements with the building department responsible for the property and complete any required historic or HOA review before ordering materials or beginning work.
Mangonia Park is a small town off Australian Avenue, and every roof in it is permitted under the Florida Building Code 8th Edition, in force since 31 December 2023. Before filing we confirm the permit desk for the address and prepare the county roofing forms: 100 general, 200 shingle, 300 tile, 400 flat.
On the county map the mainland here is in the 160 mph design wind band, and the whole county is a wind-borne debris region. The code sets secondary water barrier requirements on a re-roof and accepts more than one method, a full self-adhered membrane or sealed deck joints under underlayment.
- 160 mph with no shoreline
- The county's design wind for the mainland is 160 mph as a three-second gust. Every shingle strip gets at least four corrosion-resistant nails driven three-quarters of an inch into the deck.
- Summer storms on Australian Avenue
- Daily summer downpours and wind-driven rain test flashing and edge metal here more than salt does. The secondary water barrier is what keeps a lifted shingle from becoming a wet ceiling.
- Flood legend from October 2026
- New county flood maps took effect on 20 December 2024, and from 1 October 2026 every permit application in Palm Beach County carries a flood legend. We look up the Mangonia Park parcel before filing.
What homeowners say
As the Director of Construction here at Habitat for Humanity of Greater Palm Beach County, I always turn to Molsbee Roofing, Inc for all of my roofing needs. Whether it be new construction, a remodel or one of our stores having a leak on a Sunday night. We've worked together for 15+ years.Read on Google
Roof repair questions in Mangonia Park
Can a Mangonia Park house roof be repaired, or does it need replacing?
Usually repaired, when the failure is a single part and the deck and underlayment around it are sound. Several openings showing a failed layer under the covering, or a deck that has taken water for seasons, point to replacement.
The quarter-roof rule considers how much of a roof system or section is repaired, replaced or recovered in any 12-month period. Above a quarter, the roof covering across that entire system or section generally must be replaced or recovered to meet current code requirements.
If that system or section was built, repaired or replaced in compliance with the 2007 Florida Building Code or a later edition, only the portion being worked on must meet applicable current code requirements. We measure the damaged area against its roof section before pricing, and the repair and the replacement are put side by side in writing, with photographs.
How is a warehouse roof repair in Mangonia Park scheduled around a working floor?
Sections are opened and closed within one working period, so nothing above the floor is left exposed, and material and debris moves are planned around loading and vehicle access. Any area above stock or equipment that cannot be disturbed is programmed on its own.
Where the membrane around a failed detail is dry and sound, the repair is kept to that detail; where test openings find wet insulation, the scope says so and prices the wider options separately.
What does a Mangonia Park repair inspection see, and what stays hidden?
From the roof, and from the roof space on a house, we check the covering, flashings, valleys, collars and outlets; on a large span, every rooflight, penetration and outlet is photographed against a mapped section. The layer beneath an intact covering and the deck under it cannot be read without opening, so we open at the points the evidence leads to and photograph what is there.
The written scope says which areas were seen and which were not, and anything found later is priced as its own line for your approval.
What happens first when a Mangonia Park roof is leaking today?
Finding the entry point. Water rarely drops where it gets in, so that search comes before any wider repair, and our Mangonia Park roof leak repair page explains how it is done on houses and on large spans.
561-318-8624 is answered at any hour, every day of the week. Once the leak is stopped, the rest of the roof is inspected, and further work goes into the written scope as separate lines.
Which roofer takes on Mangonia Park repairs, and what is handed over afterward?
Molsbee Roofing does: family-owned since Don Molsbee started the company in 1975, based in Lake Worth Beach, a Florida Certified Roofing Contractor (license CCC1327429), GAF Certified Contractor, Owens Corning Preferred Contractor and Carlisle-certified for TPO, rated 4.8 from 200+ Google reviews. You receive photographs and a priced written scope before any work, then photographs of the completed repair, any permit record and the manufacturers' product warranties in writing.
Once the repair is complete, we write a roof certification letter for your insurer whenever one is requested.




