Singer Island / Riviera Beach · Palm Beach County, Jupiter to Boca Raton
Metal roof replacement on Singer Island
Metal is the covering we recommend most often on this island, and the reason is the same reason everything else here struggles: salt, arriving in the air from the ocean on one side and the Intracoastal on the other, every day of the year. A standing-seam aluminium panel on stainless clips has almost nothing exposed for salt to reach.
Request your free inspection!
Google★★★★★4.8 · 200+ reviews
50 Years- GAF Master Elite®
- Owens Corning
- BBB
- Lifetime Workmanship Warranty
Singer Island / Riviera Beach · Metal roof replacement
Roofing in Singer Island / Riviera Beach since 1975.
Metal is the covering we recommend most often on this island, and the reason is the same reason everything else here struggles: salt, arriving in the air from the ocean on one side and the Intracoastal on the other, every day of the year. A standing-seam aluminium panel on stainless clips has almost nothing exposed for salt to reach.
An exposed-fastener panel, the kind with rows of visible screws and rubber washers, has hundreds of small openings across the same roof, and every one is a place where a washer will eventually shrink and let water past. On an island address that single difference decides whether a metal roof is a long-term answer or a recurring argument with your own house.
It is not the only consideration. Metal sheds a hard rain quickly, which matters when storms arrive as volume rather than drizzle, and a light-coloured panel over a ventilated roof space runs cooler than dark tile.
What metal does not do is excuse the work underneath. The deck is still walked and re-nailed, the self-adhered layer still goes across the whole roof, and the flashing at every wall, skylight and pipe still has to be formed rather than sealed.
And the hardware still has to be specified for the exposure, because a hidden steel clip in salt air will fail long before the panel above it does. Where a community reviews profile and colour, that submission goes in before anything is ordered, because a panel system arriving on site against an unapproved specification is an expensive way to discover the sequence.
We check the document governing your address at the inspection and put the answer in writing. We are Molsbee Roofing, family-run since 1975, based in Lake Worth Beach, licensed CCC1327429.
We install metal roofs throughout 33404. Free roof inspections at 561-318-8624, open 24 hours a day, 7 days a week.
- Standing seam and 5Vmetal roof systems
- Lifetimeworkmanship warranty
- CCC1327429Florida licensed
More for Singer Island / Riviera Beach
More roofing in Singer Island / Riviera Beach.
Roof replacement, repair and commercial roofing pages for this town.
Roofing in Singer Island / Riviera Beach
Replacement, repair and every roof type, for this town.
Commercial roofing
Flat, TPO, tile and metal for plazas, condos and offices.
Flat roof repair and replacement
TPO, modified bitumen and coatings for flat sections, lanais and buildings.
Roof inspection
A free inspection with photos and a written report of what we found.
Roof leak repair
Leaks found, photographed and fixed with matching material.
Roof maintenance
Sealing, lift-and-relay and the small fixes that add years to a roof.
Roof replacement cost
What moves the price of a full roof here, in plain terms.
Shingle roof replacement
Architectural shingle rated for coastal wind, with the underlayment done right.
Storm damage roof repair
Wind-lifted tile and shingle, tarping and honest timing after a storm.
Tile roof replacement
Concrete, clay and barrel tile, with the underlayment that decides how long it lasts.
Good to know
What to know.
- Standing seam versus exposed fastener
Standing seam hides its fasteners beneath the raised seam, so weather never touches them and the panel can move with temperature without working a hole around a screw. Exposed fastener costs less, installs faster, and puts a rubber washer at every fixing to age in the sun. On an outbuilding that trade can make sense. On a house on this island we quote standing seam and explain why on the page rather than in a meeting.
- The coastal package is the whole point
Near the water the panel is only half the specification. Clips, screws, drip edge, valley metal and the trim at every hip and ridge have to be stainless or the correct grade of aluminium, because a hidden steel fastener in salt air rusts long before the panel above it does. We name the metal and the fastener grade on the quote for island addresses. If a competing price does not name them, that is the question worth asking about it.
- What goes on underneath
Old covering off. Plywood walked sheet by sheet and soft pieces replaced. Deck re-nailed to current code. Self-adhered membrane across the entire roof, so the house stays dry even during the hours a panel is off. Then the panel system, with formed flashing at every wall, skylight and pipe rather than a bead of sealant doing structural work. The county inspects it before we finish, and each of those items is a separate line on the price.
- Heat, noise and the two questions that follow
A light-coloured metal roof over a ventilated roof space runs cooler than dark tile, which is worth something on an island summer. Noise is the other question, and the honest answer is that a metal roof over a solid deck and a full membrane is not the tin shed people remember, because the deck and the roof space absorb most of it. We would rather tell you that at the inspection than have you discover the opposite after the first storm.
How it works.
- 1
Free roof inspection
We photograph what we find and hand you a written, line-item estimate.
- 2
Written price
You see the price before anyone starts. No surprises on the invoice.
- 3
Permit and install
We pull the permit, do the work and clean up every day.
- 4
Inspection and warranty
County inspection passed, warranties registered, final walk with you.
Why Molsbee
Why Molsbee Roofing.
- Lifetime Workmanship Warranty
We stand behind the install for as long as you own the home.
- Florida licensed CCC1327429
Fully insured, every job permitted and inspected.
- 4.8 stars, 200+ Google reviews
Reputation built one Palm Beach County roof at a time.
- Family-owned since 1975
Three generations of Palm Beach County roofing.
Neighborhoods
Singer Island / Riviera Beach neighborhoods.
Where we work in and around town.
Standing-seam metal prices with tile at the top of the range in Palm Beach County, above shingle. Panel gauge, hips and the coastal fastener package move it, and it goes in writing first.
All service areas ↗
Roofing questions
Frequently asked questions.
Who installs metal roofs on Singer Island, FL?
Molsbee Roofing. Family-run since 1975, based in Lake Worth Beach, licensed CCC1327429, working Palm Beach County from Jupiter to Boca Raton. We install standing-seam metal throughout 33404, on the single-family streets at Palm Beach Isles, Yacht Harbor Manor, Yacht Harbor Estates and Pine Point. A roofer walks the roof first, photographs the condition of the existing metal and flashing, and names the panel and fastener grades on the written specification. Call 561-318-8624.
Is metal better than tile on an island address?
Frequently, and it depends on the house and what your community allows. Metal with a proper coastal fastener package has very little exposed for salt to attack and is lighter on the structure. Tile is heavier, is what many of these streets were built with, and depends entirely on the metal beneath and around it, which is the part that corrodes. Neither is right everywhere. We price both from the same measurement where both are genuinely available to you.
Will a metal roof rust out here?
The panel should not, if it is the right metal. What rusts on an island is the hardware: steel clips, screws, valley metal and drip edge hidden under a perfectly good panel. That is why we specify stainless and marine-grade aluminium on these addresses and write the grades on the quote. A metal roof that fails early near the water has almost always failed at its fasteners rather than its panels, and the failure is invisible until water appears inside.
Can metal go over my existing roof?
Not on a house, as far as we are concerned. Laying panels over an old covering hides the deck, so soft plywood, a tired membrane and rot around a pipe all stay hidden and keep spreading, and it traps moisture against the wood. Our metal replacements are tear-offs: everything comes off, the deck is walked and re-nailed, new membrane goes down, then the panels. It costs more on the day and it is the only version we will guarantee.
How long does a standing-seam roof last here?
Longer than anything else we install on this ground, provided the hardware matches the panel. The panel is not what limits it; the clips, fixings and trim are, and specified correctly for salt they last a very long time. Specified generically to save a modest sum, they become the thing that ends the roof early while the panels above them are still perfectly serviceable. That is the entire argument for naming the grades on the quote.
